The First, Daily maintenance
1.Inspect the engine oil airplane. Do not operate the engine when the oil plane is lower than the reduced tag "L" or more than the high mark "H". 2. Examine the engine coolant airplane. It can just be executed after the assessment. 3. Whether the self -assessment engine is harmed and also leak (leakage, water leak, and oil leak), whether the belt is unwinded or used, and also pay attention to the uncommon noise. 4. Check the oil plane of the oil bath air filter. 5. Check whether the electrical tool is intact and also whether the reminder refers to the correct placement, or else it will certainly be changed. 6. Observe whether the triggers on the electrical ring are normal. If it is abnormal, check as well as omit quickly. 7. Clear the dirt and also dirt of each component of the generator set. Maintain the generator system tidy. 8. Clean or change the air filter or filter aspect.
Second, regular maintenance
1. Examine the air filter and clean the early filter and also dust tray.
2. Check the intake resistance (via the consumption resistance index). 3. Release the gathered water in the gas storage space cyndrical tube to keep the compressed air system without water, in order to avoid the control system fail in the cold climate.
4. Release the water or sediment in the fuel tank and also fuel filter.
5. Replace the oil in the oil bathroom air filter, never make use of dirty or used oil.
6. The voltage adjusttor ought to be kept tidy. Take notice of the fever of the siliconic component.
7. Examine whether the silicon part is dirty and tighten the screw fastener.
8. Examine whether the parts of the inspirational tool are removed welding, busted oriest, and also loosening.
Third, regular monthly maintenance
1. Examine the connection of the electric element wires to get rid of the feasible faults that might happen in the brief circuit of inadequate call. 2. Examine whether the mechanical connection parts of the generator unit are reputable and whether the lubrication is great. Check the insulation resistance of the electric line at once, and also it must be higher than 0.5 trillion euros. Otherwise, drying measures need to be taken. 3. The steel component of the generator set have to be dependable. 4. Examine the wear of the electrical brush, adjust the spring pressure, and also the brush requires to be changed.
Post time: Jun-07-2023